-
-
- Services
- Arrangement of management accounting and reporting
- Arrangement of bookkeeping and tax accounting
- Budget modeling
- Preparation and consolidation of financial statements in accordance with the international reporting standards (IFRS, US GAAP) and corporate procedures
- Arrangement and optimization of business processes
- Corporate structure optimization
- Analysis of the potential of development of business products and services
- Assessment of investment opportunities of business projects, business plan development, technical and economic assessment
- Financial analysis and modeling
- Due Diligence
- Solutions
- Experience
- Services
-
- Services
- Comprehensive automation of management accounting
- Development and implementation of specialized information systems
- Comprehensive automation of operative accounting
- Automation of tariff calculation and control for public utilities companies
- Arrangement and automation of banking products
- Automation of corporate document flow
- Integration and migration of information systems
- IT projects management
- Gathering and analysis of business requirements to IT solutions
- Assessment and selection of IT solutions
- Development of IT strategy
- Consulting and IT audit
- Telecommunication audit and communications system
- Solutions
- Experience
- Services
-
IT Audit
- Services
- Audit of IFRS financial statements
- RAS audit of financial statements, bookkeeping and taxation
- Consulting services and methodological support
- Outsourcing bookkeeping and tax accounting in compliance with the Russian standards
- Analysis of economic feasibility of expenses included into tariff calculation at public utility companies
- Solutions
- Experience
- HomeIPoint
- Services
-
Integration and migration of information systems
Most present day Companies use in their activities different information solutions. And almost for every company, sooner or later, the issues of integration of information systems and/or their migration to more technological platforms gain importance. Often there are no ready answers to these questions, so IDelync approaches the selection of optimum alternate solutions for each Company in a comprehensive and balanced manner.
IDelync offers services of integration of different information solutions of a Company, which allows to:
-
organize work with all levels of corporate data whatever the type of software is;
-
eliminate or minimize repeated input of information into a Company’s existing information solutions;
-
organize common information space of a Company with precisely defined data flow between different solutions and delimitation of rights among users.
The main advantage of integration solutions is that the positive effect from their use can be achieved earlier and with lower expenses than it would be by selecting solutions suggesting replacement or modernization of information solutions. IDelync’s experts have an extensive experience in integration and they have realized projects of different information systems, such as: 1Ñ 7.7 --> 1Ñ 8.x; Info-bookkeeper -->1Ñ; Turbo Bookkeeper --> 1C; Parus --> 1Ñ; StoreHouse --> 1Ñ; R-Keeper --> 1Ñ; Excel --> 1C.
System migration. In the event when certain information solutions have become obsolete and do not meet the company’s requirements any more, the question arises of changeover to a new, more technological platform or solution. In this case the Company needs to complete the changeover fast and in a quality manner. It is this kind of quality and optimal in terms of time solutions that IDelync specializes in. Moreover, IDelync has developed a generic integrable module for accounting systems on the basis of 1C:Enterprise, namely from 1C:Enterprise 7.7 to 1C:Enterprise 8. As a result of migration, the Company receives not only a more up-to-date and more efficient solution, but it can also automate processes not covered earlier.
Delync suggests to perform migration to other software products stepwise:
-
Architectural, analytical and business audit of existing IT systems. These works are performed for assessing the current condition of systems and receiving information for selection of a new system. Simultaneously we carry out gathering of business requirements to the new solution, which allows to foresee all the necessary modules in the new solution;
-
Selection of technologies for migration of IT systems. At this stage, technologies for performing works of migration are selected and designed. In case migration is expected from different configurations of 1C:Enterprise 7.7 to 1C:Enterprise 8, IDelync utilizes proprietary module tested in numerous projects;
-
Development and setup of the migration mechanism and its further testing;
-
Performing migration to the new solution, beta testing of the received IT system;
-
Putting the IT system into operation, system support. Careful planning of works related to putting the new system into operation allows to perform the launch of the new solution on time and minimize risks associated with implementation of a new solution. System support is carried out as a part of a separate agreement with the Client or by the Client’s internal IT service.
Due to careful selection and analysis of the Client’s business requirements as well as to designing and testing of the integration mechanisms and migration of systems and efficient cooperation with the Client at all stages of works, IDelync successfully performs integration of systems migration both as a part of separate projects and as a part of projects of comprehensive automation of operating and management accounting of companies.
- Comprehensive automation of management accounting
By management accounting we mean a system of corporate information on business processes necessary for running a company. IDelync offers services of comprehensive automation of management accounting – creation of a tool for obtaining reliable, essential and up-to-date management information in the format convenient for a manager.
Management accounting suggests automation of the following areas:
-
Budgeting;
-
IFRS accounting and reporting;
-
IFRS consolidation;
-
Analytical management reporting;
-
Key indicators and Balanced Scorecard.
The information of operating accounting is the source of primary data for management accounting. This is the very reason why during automating management accounting, it is important not only to build a system of management reporting, but also connect it to the systems of operating accounting excluding the possibility of multiple entry of primary information into different systems. Taking into consideration the fact that nowadays most of Russian companies have solutions in automation of operating accounting based on 1C: Enterprise products, IDelync actively uses products of this family for automation of management accounting. This often helps not only to set up integration mechanisms fast and in a quality manner, but also fully realize operating and management accounting of a company in a single information solution.
By studying a company’s needs carefully, IDelync’s experts offer variants of solutions for automation of management accounting both on the basis of typical solutions of 1C: Enterprise, and on the basis of proprietary solutions for budgeting and accounting in compliance with the international standards.
Realization of projects of comprehensive automation of management accounting is performed stepwise in the following sequence:
Stage 1. Pre-project examination (analysis).
The purpose of this stage is to indentify and agree with the key experts on business requirements to the system being developed, functionality of the solution and automation project results in general, work out proposals on selection of a platform and configuration for realization of the system. Special attention in development of the system of operative accounting is paid to the issues of potential use of the data of this system as a source for the future system of management accounting.
Stage 2. Preparation of the “Project vision” document.
On the basis of the pre-project examination, IDelync’s experts together with the Client’s key specialists prepare “The Project Vision” document. The purpose of this stage lies in formalization and recording the understanding of the main Project parameters aimed at comprehensive automation of operative accounting, achieved at this stage of examination.
Description of the following sections can be found in the “Project Vision” document:
-
The structure of the Solution in terms and objects of the selected platform and configuration;
-
The list and description of the realized functional of the Solution as well as deviations from the base performance capabilities of the selected configuration;
-
The necessity and the level of integration of the proposed Solution with other information systems (Client-bank, Web-application, OLAP-reporting, etc.)
-
Recommendations on provision of (optimization) required hardware and technical resources for optimal operation of the Solution.
-
Stages, time-frames and budget of the Project’s realization.
Stage 3. Design, setup and adjustment of the information solution.
The following tasks are realized at this stage:
-
Methodological adaptation of regulated processes, document flow and reporting;
-
Designing changes in the information solution, their realization in the system;
-
Setup and creation of a prototype for adjustment and checking of correct realization of accounting and reporting of the obtained solution;
-
Initial fill of the information solution (fill of reference data, transfer of the original remainders).
Subsequent to the results of this stage, the information solution is formed on the basis of the selected typical configuration or IDelync’s own decision, adjusted to the needs of the enterprise, in accordance with the current requirements to automation, defined at the stage of Pre-project examination. The obtained information solution is handed over for beta testing.
Stage 4. Beta testing and user consultation.
The purpose of the stage of beta testing is full scale testing of the realized settings and performed adjustment of the information solution, with close support of a Consultant over the whole of the agreed period of time. At this stage the enterprise’s employees are maximally involved into work with the obtained information solution, receiving all required consulting support from the Consultant and learning the peculiarities of work of the information solution.
Stage 5. Productive operation of the information solution and post-project maintenance.
Upon successful completion of the stage of beta testing, an information solution is handed over to productive operation. The enterprise’s experts independently operate the information solution turn to the Consultant only when necessary.
The key to successful realization of an operative accounting automation Project is in the Project’s containing a full list of the Executor’s services: from assistance in realization of current requirements to comprehensive methodological support over the whole duration of the project. This is the reason why the project team from the side of the Executor must include experts in the area of IT, system analysis and financial analysis.
-
- Development and implementation of specialized information systems
IDelync offers services of development and implementation of specialized information systems meant for a client’s specific requirements and methodology. This kind of solutions are in demand when automating specific business processes of varied sectors of business and their realization requires high qualification and experience of their executors.
On the basis of extensive experience in the area of arrangement and automation of operating and management accounting of enterprises of varied sectors of business, IDelync successfully realizes projects in development and implementation of specialized systems.
In particular, our experts have realized a number of projects in the following areas:
-
tariff calculation for public utility companies;
-
automation of specialized banking products and their integration with the bank’s internal information solutions;
-
automation of man hour accounting in engineering companies;
-
automation of stocktaking and software and hardware accounting of a company;
-
integration of accounting systems with an internet-shop at a company’s web site;
-
automation of management accounting of general contractor construction companies.
In the course of development and implementation of specialized information systems, IDelync’s experts pay special attention to the primary gathering of the Client’s requirements to the system being designed, their documenting, careful design of the future system, agreement of the key requirements with the responsible persons in the company. Efficient technology of internal quality control at all stages of work allows to automate specific parts of accounting or business processes within time-frames and budget as well as required functionality, acceptable for the company.
-
- Comprehensive automation of operative accounting
Operative accounting – accounting meant for submitting information for the purpose of administering the current affairs of a company by its executive services. Operative accounting is a natural continuation of bookkeeping and is aimed at satisfaction of needs of executive services for up-to-date and reliable information at any moment in time.
IDelync provides services of comprehensive automation of operative accounting of enterprises representing different kinds of business.
In this case operating accounting stands for accounting of the following business processes:
-
Sales and CRM;
-
Procurement;
-
Services;
-
Stocks;
-
Production;
-
Bookkeeping and tax accounting, regulated reporting;
-
Treasury;
-
Personnel and salary;
Executive services of a company require the data of operative accounting for carrying out current activities and timely solution of arising issues, and they are also the source for management accounting data. The information received as a result of operating accounting is processed, supplemented with necessary analytical cuts and is further transformed into aggregated data of management accounting.
Realization of projects of comprehensive automation of management accounting is performed stepwise in the following sequence:
Stage 1. Pre-project examination (analysis)
The purpose of this stage is to indentify and agree with the key experts on business requirements to the system being developed, functionality of the solution and automation project results in general, work out proposals on selection of a platform and configuration for realization of the system. Special attention in development of the system of operative accounting is paid to the issues of potential use of the data of this system as a source for the future system of management accounting.
Stage 2. Preparation of the “Project vision” document
On the basis of the pre-project examination, IDelync’s experts together with the Client’s key specialists prepare “The Project Vision” document. The purpose of this stage lies in formalization and recording the understanding of the main Project parameters aimed at comprehensive automation of operative accounting, achieved at this stage of examination.
Description of the following sections can be found in the “Project Vision” document:
-
The structure of the Solution in terms and objects of the selected platform and configuration;
-
The list and description of the realized functional of the Solution as well as deviations from the base performance capabilities of the selected configuration;
-
The necessity and the level of integration of the proposed Solution with other information systems (Client-bank, Web-application, OLAP-reporting, etc.);
-
Recommendations on provision of (optimization) required hardware and technical resources for optimal operation of the Solution.
-
Stages, time-frames and budget of the Project’s realization.
Stage 3. Design, setup and adjustment of the information solution
The following tasks are realized at this stage:
-
Methodological adaptation of regulated processes, document flow and reporting;
-
Designing changes in the information solution, their realization in the system;
-
Setup and creation of a prototype for adjustment and checking of correct realization of accounting and reporting of the obtained solution;
-
Initial fill of the information solution (fill of reference data, transfer of the original remainders).
Subsequent to the results of this stage, the information solution is formed on the basis of the selected typical configuration or IDelync’s own decision, adjusted to the needs of the enterprise, in accordance with the current requirements to automation, defined at the stage of Pre-project examination. The obtained information solution is handed over for beta testing.
Stage 4. Beta testing and user consultation
The purpose of the stage of beta testing is full scale testing of the realized settings and performed adjustment of the information solution, with close support of a Consultant over the whole of the agreed period of time. At this stage the enterprise’s employees are maximally involved into work with the obtained information solution, receiving all required consulting support from the Consultant and learning the peculiarities of work of the information solution.
Stage 5. Productive operation of the information solution and post-project maintenance
Upon successful completion of the stage of beta testing, an information solution is handed over to productive operation. The enterprise’s experts independently operate the information solution turn to the Consultant only when necessary.
The key to successful realization of an operative accounting automation Project is in the Project’s containing a full list of the Executor’s services: from assistance in realization of current requirements to comprehensive methodological support over the whole duration of the project. This is the reason why the project team from the side of the Executor must include experts in the area of IT, system analysis and financial analysis.
-
- Integrable modul of data exchange "ID.Integration"
A great many enterprises have now achieved a high automation level. In most cases Companies do not have a uniform information solution, but they rather use a number of different systems operated for local accounting tasks of financial and tax accounting, current and management accounting as well as for the purposes of preparation of required reports.
The typical product on which information solutions of domestic enterprises are based is 1C. Taking this fact into account, we can identify the issues the enterprises of the Company are most frequently confronted with:
Integration – necessity of unification of several separate systems in order to obtain an integrated information solution and elimination of the necessity to repeatedly enter data into separate databases.
Migration – execution of a fast and quality transition from solutions of any versions of accounting systems to systems of the 1C: Enterprise 8 version.
IDelync experts have developed a universal integrable data exchange module between different accounting programmes and configurations of “1C:Enterprise” platforms, versions 7.7 and 8.1.
"ID.Integration" provides multiple features of flexibility:
-
synchronization of reference data objects including the possibility of integration of several objects of a source into one receiver object in order to obtain collective data as well as combine objects of different source bases into a unified standard in the receiver;
-
synchronization of the card of accounts, transactions and correspondence with a view to reflecting business transactions.
Use of the universal data exchange module allows to solve the following problems correctly:
-
merge of data from multiple databases into a single consolidated system;
-
transformation of accounting transactions both into transactions of different kinds (tax, international, etc) and into accounting entries with other correspondence subject to the analytic objects;
-
full automation of data exchange process. The automated process of data exchange is performed in accordance with the preliminary settings of the tables collocating the reference data, cards of accounts and correspondence , and after this it is just enough to monitor the correctness of the downloaded data;
-
possibility of manual data exchange with flexible preliminary settings going as far as having a separate operation for reflection of business accounting. At the same time the receiving base provides for manual adjustment of the entries of the downloaded transactions under the condition that the changes are protected from corrections in the event of repeated data updating in relation to this transaction.
It is worth noting that use of the integration module when the enterprise is being transferred from the systems of the basis of 1C 7.7 to 8.1, allows not only to transfer the breakdown of balances in a fast and quality manner (i.e. account balances as of a certain date) but also to ensure complete transfer of the turnover of accounts for any data period in the current accounting system. This kind of approach allows to perform the transfer from one accounting system to another saving the possibility to prepare regulated reports covering the whole accounting period, regardless of the date of first use of the system.
-
- Building and construction
- Arranging and automation of IFRS-compliant management accounting, CentreServiceEstate Group of Companies, Moscow, Russia
The main objective of this Project is implementation of management information system (MIS) in 5 managed companies with the view of introduction of management accounting and preparation of IFRS-compliant statements, both for a separate company and consolidated IFRS-compliant statements.
As the result of realization of the project, the accounting data from each of the managed companies will be automatically translated into IFRS, the MIS will submit a pack of IFRS-compliant statements and their interpretation. 1C:Enterprise 8.0 was selected as the software for the MIS.
- Automation of procedures of budget preparation and budgetary control, Anna-KSU, Moscow, Russia
The project included improvement and integration of the existing information and accounting management systems, standardization and further automation of the process of budget preparation and budgetary control of building projects.
In the course of the project, significant attention was also paid to increasing the level of protection of confidential management information. The project resulted in elimination of duplication and improvement in security of data storage, simplification of the processes of budget preparation and budgetary control, standardization of the list and the contents of building and construction works, standardization of project documentation, automation of procedures of settlement payments and as the result improvement of the procedures of control and management of building projects and simplification of cooperation with clients and partners were achieved.
- Implementation of a management information system for building projects, Stroimonolit, General Building and Construction Contractor, Moscow, Russia
The project included development and implementation of a management information system for building projects of a general building and construction contractor. The project management system allowed to fully automate the everyday business-processes of the company in management of relationship between the customer, the general contractor and the subcontractor.
The project resulted in regulation and hence standardization and sorting of documentation flow within the framework of the above-mentioned business processes, management accounting was attained allowing to conduct analysis of target and actual project performance, monitor the status of mutual settlements with partners in each project and in the company on the whole.
- Arranging and automation of IFRS-compliant management accounting, CentreServiceEstate Group of Companies, Moscow, Russia
- Wholesale and Retail Trade
- Automation of management accounting and optimization of business process of sales and logistics for Torgovyi Dom “Slobozhanka" Ltd., Kharkov, Ukraine
Torgovyi Dom “Slobozhanka" Ltd. Company (further referred to as TDS or the Enterprise) is an importer and distributor of famous brands of cosmetics, hygiene products and household goods. Using its well developed structure, TDS sells its clients a wide range of cosmetics and hygiene goods under famous brands from Polish, Russian, Ukrainian and Chinese producers in wholesale.
The objectives of this project were increasing efficiency of the operative and management processes of the Enterprise as to the functions of accounting, management and control by means of automation.
Taking into consideration the continuous operating regime of the Enterprise as well as rather complicated issues connected with the necessity of fast and quality organization of loading processes solved by the logistics, the main task to be solved for the purposes of the operative accounting was optimization of the processes of order processing, preparation of required shipment documents, loading of trucks and their dispatch.
Based on the preliminary examination and the analysis of the business requirements of the Enterprise, the Consultant recommended to switch from Granit information system to an ERP-class system on the basis of 1C Enterprise 8. The 1C configuration of “Management of a manufacturing enterprise" was chosen as the basic solution. The business process was implemented in an integrated system of operative and management accounting to manage the servicing of customer orders, which includes the tasks of documents preparation, shipping and warehouse logistics and control of the shipment confirmation. In order to optimize the order-taking system, a wide range of integration features with the outer sources (Emigo, Exite, EXCEL, pocket computers) was implemented in the system also featuring an implemented pricing process by the brand and customer as well as the mechanism of control of accounts receivable by the brand and date. The implemented solution encompasses all spheres of economical activity of the Enterprise and allows to keep records of its fixed assets, calculate the administrative salary, Customer Relationship Management (CRM) and obtain financial reports covering any period of interest (including those on a daily basis). The following reports have been implemented in the block of financial reports: Profit and Loss report, Cash Flow report, Balance statement. The single system of management accounting is integrated with the systems of bookkeeping for further preparation of regulated accounting, it has also been integrated with the Client-Bank system.
- Arranging and automation of the processes of buying commodities and materials, treasury function, AVTOVAZ Automobile Trading Company
Within the framework of the project, IDelync fulfilled the following responsibilities:
- Analysis and arranging of business-processes of buying/selling commodities and materials;
- Conducting of assessment and selection of a solution for automation of management, business and tax accounting;
- Designing of hardware and software IT infrastructure, assisting in selection of suppliers and carrying out of procurement activities;
- Assisting in development, configuration and administration of netware, hardware and software;
- Development and implementation of a subsystem of management of treasury accounting operations.
- Automation of management accounting and optimization of business process of sales and logistics for Torgovyi Dom “Slobozhanka" Ltd., Kharkov, Ukraine
- Housing and communal Services
- Development and implementation of the system of rate making and analysis of its implementation, Municipal Heat Supply Network, Surgut State Municipal Unitary Enterprise, Surgut, Russia
The project included development of a budget model of the enterprise, methodological calculation models and tariff execution control concerning the services of the enterprise (heat and water supply, other services), development and implementation of mechanisms of their automated calculation and execution control in the Management Information System (MIS) based on 1C, as well as integration of 1C with the accounting information system.
The project allowed to standardize and sort accounting processes at the enterprise, maximally detail the target and actual calculation data and thus increase information value and immediacy of receipt of financial and management statements.
- Development and implementation of the system of rate making and analysis of its implementation, Municipal Heat Supply Network, Surgut State Municipal Unitary Enterprise, Surgut, Russia
- Investment sector
- Optimization of the systems of business and management accounting, Rinko Group of Companies, Russia
The objective of the Project “Optimization of the systems of business and management accounting” was to strengthen the function of business accounting in the company’s Moscow office. The Project included analysis of requirements to conducting business accounting and conducting a transfer of business accounting from “Parus” software to 1C:Accounting 7, as well as updating 1C configuration for some of the Group’s companies.
- Optimization of the systems of business and management accounting, Rinko Group of Companies, Russia
- Banking
- Analysis of the telecommunications structure and communications systems for UkrSibbank Stock Company, BNP Paribas, Kiev, Ukraine
UkrSibbank is one of the most dynamically developing multipurpose banks on the Ukrainian market. The bank is a member of the international BNP Paribas Group, which takes the first place among foreign banks represented in Ukraine in terms of assets, net profit and market capitalization.
The objective of the project is to decrease telecommunications expenses by means of reorganization of telecommunications architecture of the bank network and the telecommunication channels.
The project included troubleshooting of the parameters of the existing network as well as a corresponding assessment of the prospects and possibilities of implementation of a renewed format of multiservice networks with implementation of VOIP telephony and a single service numbering plan. A competitive analysis of tariffs and prospects in Ukrainian market in the field of network communications and routing was performed as well.
Works performed within the framework of the project:
-
comprehensive analysis of the data reflecting the state of operator communications of the bank (documents, contractual relations, the architecture of the network, expenses);
-
data analysis on the internal technical condition of the architecture of the bank, communications equipment and the condition of IP-telephony; analysis of the numeric field of land-line communications in Ukraine;
-
gathering data on tariffs and covering on the market of network communications and routing of Ukraine, expert analysis of corporate business offers;
-
cross-evaluation of market presence of vendor suppliers of machinery as well as integrator companies on the market of network communications and routing;
-
developing suggestions as to changes in the organizational structure and a new informational and technical architecture for purposes of implementation of a multiservice network, a single numbering plan and a service call-centre.
-
- Analysis of the telecommunications structure and communications systems for UkrSibbank Stock Company, BNP Paribas, Kiev, Ukraine




